alemdaroglumakina

Functions and Parts of a Gear Box

  1. Provide the torque needed

 

to move the vehicle under a variety of road and load conditions. It does this by changing the gear ratio between the engine crankshaft and vehicle drive wheels.

  1. Be shifted into reverse so the vehicle can move backward.
  2. Be shifted into neutral for starting the engine.

 

Main parts of gear box

 

  1. Counter shaft:

Counter shaft is a shaft which connects with the clutch shaft directly. It contains the gear which connects it to the clutch shaft as well as the main shaft.

  1. Main shaft:

It is the shaft which runs at the vehicle speed. It carries power form the counter shaft by use of gears and according to the gear ratio, it runs at different speed and torque compares to counter shaft.

  1. Gears:

Gears are used to transmit the power form one shaft to another. They are most useful component of transmission box because the variation is torque of counter shaft and main shaft is depend on the gear ratio. The gear ratio is the ratio of the driven gear teeth to the driving gear teeth. If gear ratio is large than one, the main shaft revolves at lower speed than the counter shaft and the torque of the main shaft is higher than the counter shaft. On other hand if the gear ratio is less than one, than the main shaft revolves at higher speed than the counter shaft and the torque of the main shaft is lower than the counter shaft. A small car gear box contains four speed gear ratio and one reverse gear ratio.

  1. Bearings:

Whenever the rotary motion, bearings are required to support the revolving part and reduce the friction. In the gear box both counter and main shaft are supported by the bearing.